Soudal Souda Bond Easy Manual PU Adhesive 750ml

£9.92

Only 5 left in stock

SKU: FR00720

Soudal Souda Bond Easy Manual PU Adhesive 750ml PU foam adhesive Soudabond EASY is a high performance polyurethane adhesive foam. Quick and easy to use – no mixing required. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces. Used for the bonding of many…

Description

Soudal Souda Bond Easy Manual PU Adhesive 750ml

PU foam adhesive

Soudabond EASY is a high performance polyurethane adhesive foam. Quick and easy to use – no mixing required. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces. Used for the bonding of many building materials, such as insulation panels, plasterboard and the construction of interior walls using lightweight building blocks

Open technical datasheet

Shown product

Soudabond Easy 750ml

Featured properties

Single component PU adhesive
Up to 30% quicker than traditional methods
Gap-filling capabilities
No mixing required
Porous and non-porous materials
Available in Hand Held, Gun Grade and Genius Gun

Applications

Clean, efficient and economical bonding of many types of Insulation panels – polyurethane, phenol, resin foam. Can also be used for bonding polystyrene. Bonding of gypsum plasterboard in dry lining applications. Can be used for bonding non-load bearing walls. Bonds many other building materials such as brick, stone, aluminium, ceramics, MDF, steel, cork, wood and chipboard.

Instructions

Wear safety goggles. Ensure there is sufficient ventilation and keep away from flames. Make sure surfaces are clean and free of grease and dust. Spraying water on the surfaces will improve adhesion and speed up curing. Shake can vigorously for 30 seconds. Repeat regularly for maximum yield. Use upside down. Point nozzle and press trigger. Amount of trigger pressure defines speed at which foam extrudes. Apply PU Adhesive according to application, as per the technical data sheet. Apply in a zig-zag pattern onto one of the surfaces to be bonded. Wait until the foam becomes sufficiently tacky; i.e. thread is formed between gloved finger and adhesive when briefly touching adhesive (usually about 4 minutes depending on conditions). Then press materials firmly together for 30-60 seconds. Leave to cure for at least 1 hour before applying loads. Store can upright in dry conditions between +5°C and +25°C.

Additional information

Dimensions	350 × 65 × 65 mm
tools-accessories	Adhesive

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Soudal Skeleton Gun Orange
£6.90
Add to basket

Category: Adhesives, Stair Fitting Accessories

Tags: Adhesive, Bond, PU Adhesive