Motion Sensor – Miniature – 12V/15A – integrable
41x41x23 mm
load intensity – up to 15A
Description – Application
Sensor – 12V/15A – with a miniature lens is designed for installation inside buildings. It can be used for automatic switching of lighting with intelligent controllers, universal design (mechanical – electric) allows the use of the sensor as an independent actuator connector.
Specifications
Power supply | 12V DC |
Max load current | 15A |
Detection angle | 20 degrees |
Adjusting the back-up time | Smooth adjustment – from impulse – up to 0,5-5 minutes |
Detection range | Smooth adjustment – 0.5 m – up to 1,5m |
Functions
– Control measures according to ambient light intensity
– Adjusting the back-up time
– Adjusting the detection range
Setting – start – Sensor
Install a mini sensor – connect “only” wire:
– in 1 – White
– in 2 – Brown
– In 3 – Green
Potentiometer – METER – set the max distance from the sensor for motion detection
Potentiometer – TIME – set-up time relay (for controllers stair set at minimum)
Then connect the wire
– In 4 – yellow – and set potentiometer – LUX – a threshold value depending on the ambient light intensity.
Application methods
On / off system using led strip / led bulbs – 12V
On / off system using led strip / led bulbs – 12V and with an attached dimmer for adjusting the light intensity
On / off system using LED strip / LED bulbs 12V with an additional button attached enabling all the lighting points to be ignited simultaneously without any sensors – after disconnection the system returns to the automatic mode