My Account Shop all Steps Cladding Stringers Cladding Smart LED Lights Fitting Accessories Balustrades Newel Posts Joinery Parts Flooring Doors Special Offers Fitters 👷‍♂️ Trader Club

🚚 Delivery within 3 to 5 working days

Smart LED controller for lighting stairs V5-20

£216.10

In stock

SKU: FR04001

Specifications: PDF SPECIFICATION INSTRUCTION – Number of outputs lighting: 5-20 – Output voltage 12v, Function and advantages of the controller: • Traffic control on the stairs (you go – from “up” to “down”) • Traffic control on the stairs (you go – from “down” to “up”) • Traffic control with mutual traffic on the stairs…

Description

Specifications:

PDF SPECIFICATION INSTRUCTION

– Number of outputs lighting: 5-20

– Output voltage 12v,

Function and advantages of the controller:

• Traffic control on the stairs (you go – from “up” to “down”)

• Traffic control on the stairs (you go – from “down” to “up”)

• Traffic control with mutual traffic on the stairs (one person

from “up”  the second person from “down”)

• Mode “step by step”  or “smooth lighting”

• Regulation lighting time of the light (from 0.25 seconds to 5 seconds)

• Regulation blanking time points of light (from 10 seconds to 3 minutes)

• Different modes of operation in standby mode

the mode “everything is of”

the mode – the extreme points of light shine

the mode – all the points of light shine

• Regulation of the brightness of light points in standby mode

• Permanent light (using PS)

• Supports traffic from the landing (using PS – a permanent light)

• Supports RGB led strips

* Kit is suitable for self-assembly (very easy to install.)

* Driver made us in POLAND with high-quality components, which gives almost guarantees a lifelong activity.

* For each controller add guarantees, instructions and a description of the assembly.

Possible modifications to the individual – by a separate valuation

A modern and technologically advanced LED driver is a solution that is perfect for any room. The driver comes from a reputable and proven manufacturer, which gives a 100% guarantee on the quality and functionality of its products. The controller is made of high-class components that ensure trouble-free and trouble-free operation. It is durable, durable, and very easy to install and use. It is provided with complete and simple instructions, thanks to which we will quickly discover all the secrets of its operation and programming.

Due to a modern and intelligent controller, it is possible to create lighting in virtually any interior. The controller has many programming options, so you can ideally tailor them to your individual needs. Ideally works with other elements of LED lighting, creating a trouble-free system in any interior. One intelligent controller allows you to program lighting in many rooms at the same time. As a result, you do not have to turn on and off the light in any interior separately, it will turn itself on the way you program them. Modern drivers for LED lighting are a completely new quality that will provide the perfect light in the interior in all conditions. The controllers are durable and resistant to mechanical damage and moisture. So you can mount them virtually anywhere.

IMPORTANT
When mounting the unit, be careful
– To the appropriate wiring +12 V and-12V reverse connection may damage the processor
– When the controller is switched on, do not touch the plate on the solder side – this can lead to surges and damage to the processor
– When the controller is switched on, do not touch the wires on the backs of passive and active – it can lead to surges and damage to the processor
– control channels and outlets PD, PG, PS Do not connect +12 V voltage – this can lead to surges and damage to the processor
———————————————————————
1. Connect the (-) led strips, led bulbs etc. to the appropriate stairway channel (1 step to channel 1, second to channel 2, etc.)
2. All (+) led strips, led light bulbs etc. connect – then connect to (+ 12V – LED power supply)
3. Connect the 110-230V / 12V power supply to the staircase controller (make sure the -12V is connected to the -12V socket and + 12V to the + 12V socket)
4. Make the jumper on the socket described PS, then connect the power supply 230V – if you have done the installation correctly, all the lights will light up
5. Turn off the power, remove the PS jumper.
6. Connect the motion sensors – the sensors are best installed at 25-35 cm above the ground. After installation, please check the voltage coming to the sensor. It should be at least 12V, preferably 12.05V (in the case of “white” sensors after connecting the cables the sensor should close if it is open will not work properly)
7. Program the controller as instructed without skipping any step.

Intelligent controller for stairs – Version 5-20 points of light

Specification:
Supply voltage: 8-15V DC. Typically, 12V DC.
Power consumption by the same controller: 20mA.
Power consumption by the same controller for supply voltage – 12V 0.25 W.
Current Load (Intensity): to 1A per channel (step).
Ambient temperature: 5-35 ̊C.

Description of the controller:
• Keys (DIP) “M”, “+”, “-“, “S” – keys for programming
• PS – input light is constant (after short circuit) – light all the points of light) a permanent light
• PD – sensor input short circuit (NO) up – down
• PG – sensor input – short circuit (NO) down – up
• Inputs 1 – 20 – Inputs other channels
• “-12V” – input “-” Power DC
• “12 V” – input “+” Power DC

Algorithm (the controller functions):
• Traffic control on the stairs (you go – from “up” to “down”)
• Traffic control on the stairs (you go – from “down” to “up”)
• Traffic control with mutual traffic on the stairs (one person from “up” the second person from “down”)
• Mode “step by step” or “smooth lighting”
• Regulation lighting time of the light (from 0.25 seconds to 5 seconds)
• Regulation blanking time points of light (from 10 seconds to 3 minutes)
• Different modes of operation in standby mode
the mode “everything is off”
the mode – the extreme points of light shine
the mode – all the points of light shine
• Regulation the brightness of light points in standby mode
• Permanent light (with using PS)
• Supports traffic from the landing (with using PS – a permanent light)

Turn on channel by channel. Turning off the channel by channel. Before we come to the result, the second detector will work in the opposite direction and will meet two effects on the way (the driver finds a person from the opposite direction). If it comes to an end result and works a second detector, the controller recognizes that a person leaves the stairs and it will be a signal to fade in the same direction as the lit (one was on the stairs, entered and left).

Programming
Entering Programming Mode:
1. Turn off the 12V DC power supply to the controller
2. Press and keep the microswitch “M”
3. Turn the power on the 12V DC controller
4. Entering the programming mode signals the LED to blink three times from 1 to 5
5. The controller goes into programming mode. The first step is to program the number of stairs (light points)

Programming the number of steps (points of light) – no lights, red LED
1. The default number is 5 points of light
2. The number of selected points of light is indicated by red LED no. 2 (how many times as red LED no two blinks – so is the set – points of light (stairs)
3. After entering the programming mode, use buttons (microswitches) “+” and “-” to select the expected number of points of light (stairs). Each press of the button causes the LED sequence to wait for it to complete before the next press of a button (DIP)
4. Press the button (microswitch) “S” to confirm the number of stairs (light points)
5. After pressing the “S”, – go into the programming mode operation (step-by-step or smooth lighting)

Programming working mode (step-by-step or smooth lighting) – lighting red LED No. 5
1. The default mode is smooth
2. Pressing the (DIP) “+” to select the mode – step by step (visual LED 1)
3. Pressing the (DIP) “-” to select the mode – smooth lighting” (visual LED 1)
4. Press button (microswitch) “S” to confirm operation
5. After pressing the “S” go into the programming mode speed light (lighting) stairs (points of light)

Programming the speed of light (lighting) stairs (of the light) –lighting red LED No. 4
1. The user has a choice of 20 times light (lighting) from 0.25 seconds to 5 seconds – pressing any key “+” or “-” to change the setting by 0.25 seconds
2. Pressing the (DIP) “+” extends the light (lighting) stairs (visual LED 1)
3. Pressing the (DIP) “-” reduces light (lighting) stairs (visual LED 1)
4. Press button (microswitch) “S” to confirm the speed of light (lighting) stairs (of the light)
5. After pressing the “S”, go into the programming mode staircase lighting time (points of light) after passing by the user

Programming the staircase lighting (light spots) after passing by the user – lighting LEDs no. 4 and 5
1. The default is 10 seconds. You can change this value in the range from 10 seconds to 3 minutes. The signalling is by LED no. 1. Every blink it is 10 seconds (you can change from 1 to 18 – blinks)
2. Pressing the (DIP) “+” increases the lighting time (lighting) steps after passing the user (visual LED 1)
3. Pressing the (DIP) “-” reduces lighting (lighting) steps after passing the user (visual LED 1)
4. Press button (microswitch) “S” to confirm the staircase lighting time (points of light) after passing by the user
5. After pressing the “S” go into the programming – standby mode (no one moves up the stairs)

Programming the controller standby mode (no one moves up the stairs) – lighting LED no. 3
1. The controller is equipped with three modes of operation in standby mode (the default mode set “a”) (LED signalling 2)
a. not light any light points (one blink LED 1)
b. lights are on all the points of light (the power set of the light source) (two blinking LEDs No. 1)
c. lights are extreme points of light (the power set of the light source) (three LEDs blink 1)
2. Pressing the (DIP) “+” or “-” changes the standby mode
3. After pressing the “S” move on:
a. A programming mode brightness light points in standby mode (if you choose options “b” or “c”).
b. at the end of the programming, if you selected “and” – you should then finish programming by pressing (DIP) ‘M’ “. Saving to memory is signalled blink three times, all red LEDs from 1 to 5

Programming brightness light points in standby mode – lighting LEDs no. 3 and 5
1. Visualization brightness light points in standby mode is done by LED 1
2. Pressing the (DIP) “+” brightens spotlight (LED visualization No. 1)
3. Pressing the (DIP) “-” dim spotlight (LED visualization No. 1)
4. Press button (microswitch) “S” to confirm the brightness of light points in standby mode
5. A complete set of programs will be signalled by a single blink of all the red LEDs from 1 to 5
6. Save your settings and exit programming by pressing key (DIP) “M”. Saving to memory is signalled blink three times, all red LEDs from 1 to 5

Motion Sensor – 12V/1A
Description – Application
Sensor – 12V/1A – with a miniature lens is designed for installation inside buildings. It can be used for automatic switching of lighting with intelligent controllers, and universal design (mechanical-electric) allows the use of the sensor as an independent actuator connector.
Specifications

Power supply: 12V DC
Max load current: 1A
Detection angle: 20 degrees
Adjusting the backup time: Smooth adjustment – from impulse – up to 0,5-5 minutes
Detection range: Smooth adjustment – 0.4 m – up to 2m

Functions
– Control measures according to ambient light intensity
– Adjusting the on-time
– Adjusting the detection range

Setting – start – Sensor

Potentiometer – METER – sets the max distance from the sensor for motion detection
Potentiometer – TIME – set-up time relay (for controllers’ stair set at minimum)
Potentiometer – LUX – a threshold value depending on the ambient light intensity.

Motion Sensor – Miniature – 12V/15A – integrable

Description – Application
Sensor – 12V/15A – with a miniature lens is designed for installation inside buildings.
It can be used for automatic lighting switching with intelligent controllers, and its universal design (mechanical-electric) allows the use of the sensor as an independent actuator connector.

Specifications

Power supply: 12V DC
Max load current: 15A
Detection angle: 20 degrees
Adjusting the on-time: Smooth adjustment – from impulse – up to 0,5-5 minutes
Detection range: Smooth adjustment – 0.5 m – up to 1,5m

Functions
– Control measures according to ambient light intensity
– Adjusting the on-time
– Adjusting the detection range

Setting – start – Sensor

Install a mini sensor – connect “only” wire:
– in 1 – White
– in 2 – Brown
– in 3 – Green

Potentiometer – METER – set the (for controllers’ stair set at middle) distance from the sensor for motion detection
Potentiometer – TIME – set-up time relay (for controllers’ stair set at minimum)
– in 4 – yellow – and set potentiometer – LUX (for stair controllers’ Do not connect the wire)